AUDIO SWEEPER 7116C-60W and ACO7012 shipped to India

AUDIO SWEEPER 7116C  AND ACO7012

7116C provides a pure sine wave with very low total harmonic distortion. (approx. 0.1% THD ). The total harmonic distortion of 7116C consists of the 2nd Harmonic component only and nearly without higher-order

harmonic components. So, 7116C is very suitable for testing the sound quality ( spurious noise inspection ) of all kinds of loudspeakers, headphones, receivers, piezo, speakers systems…etc.

The frequency produced by 7116C is more stable than the ordinary beat frequency oscillator produced. and the sine wave provided by 7116C is purer than the ordinary function generator. Therefore, 7116C has the advantages of low distortion and high stability. do not use the ordinary function generator to test the spurious noise ( rattle and buzz ) of the loudspeaker, loudspeaker, receiver, etc.… Because users will easily neglect the prohibited spurious noise caused originally by the high-order distortion component of the function generator.

Model – 7116C
Freq. Range :  20Hz～20 kHz in one range.
Freq. Response: ≦±0.25dB, 20Hz～20 kHz.
Sweep Mode: Manually or automatically log. sweep in one range. Setting spot ( random ) frequency is also available.
Signal:  Sine wave, THD≦0.15%, (0.1% Typical.)( 20Hz ～ 20 kHz.)
Sweep Time: 0.3～40 seconds continuously adjustable.
Frequency Counter:  4 digits display.
Resolution:  1 Hz.
Accuracy:  ± 1 Hz.
Load Impedance: ≧ 3.2 Ω.
Voltmeter:  3¾ digits,  Auto-ranging.
Low Range:  0.000v ～3.300v.
Resolution:  0.001v
High Range:  3.300v ～40.00v.
Resolution:  0.01v.
Accuracy:  ± 0.6%  of reading  ± 2dgts.
Dimension : 36 (L) ×27 (D) ×13 (H) cm.
Net Weight :
7116C ( 20W ): 6 KGS. ( Approx.)
7116C ( 60W ): 8 KGS. ( Approx.)
7116C ( 100W ): 10 KGS. ( Approx.)
Built-in Amplifier output voltage :
7116C  ( 20W )      7116C  ( 60W )      7116C  ( 100W )
8  Ohms    0 ~ 12.6 V              0 ~ 22.0 V          0 ~ 28.3 V
4  Ohms    0 ~ 9.0 V                0 ~ 15.5 V          0 ~ 20.0 V

Measurement condenser microphone ACO 7012 (TYPE 1)

Type	TYPE 7012(TYPE1)
Appearance
Frequency Response Characteristic	Free-Field
Nominal Diameter	1/2 inch
Release voltage	-36dB (15.8mV/Pa)
Polarization voltage	200V
Frequency Characteristics	10Hz～40kHz
Maximum sound pressure level	160dB
Self-noise level	19dB(A)
Temperature coefficient	0.007dB/℃ or less
Preamplifier Type	TYPE4012
Operating Temperature・ Range of Humidity	-10℃～+50℃・90%RH (no condensation)
Storage Temperature・ Range of Humidity	40% or less (at room temperature)
Outline size	Φ13.2×12.6
Weight	6.0g