shenzhen baichuan electronics
Combining the efforts of all our staff and keeping up with the trend, we have developed the version of OZONE-300 UV Ozone Analyzer, High concentration ozone generator detection, ozone detector, and O3. It is borne with the updated features and is expected to create value and benefits for customers. It turns out that the application of the technology plays an important role in deciding the performance of the product. At present, it can be widely seen in the field(s) of Gas Analyzers. The launch of a product that perfectly solves the industry’s pain points that have always adhered to the goal of technological innovation, and the newly developed products perfectly solve the pain points that have been lingering in the industry for a long time. Once launched, they have been enthusiastically sought after by the market.
| Test range: | customizable | Resolution resolution: | 0.01g/m3 remark:1mg/L=1g/m3=467ppm |
| Auxiliary Function: | temperature & pressure compensation | Sampling Flow: | 0.5L±0.2L/min |
| Input Pressure: | <0.1MPa | Concentration Error: | < 1%FS |
| Line Deviation: | < 0.5%FS | Zero Drifting: | |
| Dimension:: | 230mm(height)x330mm(width)X150mm(depth) | Power Supply: | AC 110-220V |
Product Description
Based on Lambert Bill’s law, the analyzer of OZONE-300 measures the change in the intensity of the light signal before and after the UV absorption to calculate the current ozone concentration. The equipment adopts the advanced dual UV light source system with the intelligent management system of the lamp tube and separated photocell technology that enables the analyzer to have the characteristics of no leakage, anti-high pressure, and sampling gas impact.
The ozone analyzer has a touch screen operation interface, which shows the real-time ozone concentration. The touch screen also with pressure & temperature compensation display. For the high concentration (g/Nm3) range, it has the function of flow input, which can display the output of the ozone generator in real-time. The core component adopts a long-life UV light system with high light transmittance quartz to prevent zero drifting from affecting the detection accuracy. There’s no need to close ozone inputting when zeroing to ensure the equipment can run continuously for 24 hours.
Application areas: ozone generator manufacturers, municipal water industry, industrial sewage industry, fine chemical industry food and drinking water industry, space disinfection industry, swimming pool disinfection industry, etc.
Optional range and working mode:
| Range | Sampling Method | Application Areas |
| 0-300g/Nm3 | Active pressure sampling, with pressure,temperature compensation | Real-time detection of ozone generator outlet concentration |
| 0-100g/Nm3 | Active pressure sampling, with pressure,temperature compensation | Real-time detection of ozone generator outlet concentration |
| 0-50g/Nm3 | Active pressure sampling, with pressure,temperature compensation | Real-time detection of ozone generator outlet concentration |
| 0-5000ppm | Active pressure sampling, or pumping sampling, with pressure, temperature compensation | Real-time detection of ozone concentration in box. |
| 0-1000ppm | Active pressure sampling, or pumping sampling, with pressure, temperature compensation | Real-time detection of space or ozone concentration in room. |
Technical Parameter:
| Test range: | 0-300g/Nm3 | 0-200g/Nm3 | 0-100g/Nm3 |
| 0-50g/Nm3 | 0-5000ppm | 0-1000ppm | |
| Display resolution: resolution
Resolution resolution: |
0.01g/m3 remark:1mg/L=1g/m3=467ppm | ||
| Display unit: | g/Nm3 mg/NL | ||
| Sampling Method: | active pressure sampling | ||
| Content Interface: | ozone concentration temperature compensation | ||
| pressure compensation | |||
| Light Source Life: | About 10000 hours | ||
| Display Interface: | 4.3 inch touch screen operation interface | ||
| Auxiliary Function: | temperature & pressure compensation | ||
| Sampling Flow: | 0.5L±0.2L/min | ||
| Input Pressure: | <0.1MPa | ||
| Concentration Error : | < 1%FS | ||
| Line Deviation : | < 0.5%FS | ||
| Zero Drifting: | <±0.3%.FS | ||
| Response Time: | the signal is 0.03S, showing is 0.3 S. | ||
| Ambient Temperature : | -20~50℃; | ||
| Sampling Caliber of Series Connection: | Bypass samplingΦ6 (6*4mm fast twisting interface)
Bypass samplingΦ8 (8*6mm fast twisting interface) |
||
| Output Mode: | 4-20mA | ||
| Relay Signal: | High alarm, Low alarm | ||
| Power Supply: | AC 110-220V; | ||
| Dimension: | 230mm(height)×330mm(width)×150mm(depth) | ||
| Standard configuration: | Antiseptic flowmeter filter
Ozone tail gas destroyer sampling pump |
||
